2011 SRT8 Challenger SRT8 6.4 Pipeline

Installation Instructions

1. Remove stock air box

2. The triangular opening at the bottom of the fender well needs to be enlarged to fit the Pipeline

3. Cut away bottom of triangle opening at the fender well to fit (see picture)

*suggested to cut away this area could be a jig saw or a reciprocating saw

** Use the template for cut out dimensions**

4. Install silicone hose onto throttle body

5. Install air filter onto pipeline
6. Run Pipeline through core support then install on throttle body/install hose clamps on silicone

7. Remove air temp sensor from stock air box install into Pipeline

8. Install stock vent hose onto Pipeline.