GEN111/LS SERIES SMALL BLOCK THREAD SIZE 7/16-20 PRO SERIES Flywheel and Flexplate bolts play an important role in the performance and safety of race cars and street machines alike. That’s why the fastener experts at ARP have developed special bolts tha

ur torque tube drive shaft is made from 3" x 125 wall 6061-T6 aluminum and also uses our own custom ends. This will ensure the shaft doesn't distort or break like the factory ones. The factory shaft is made from a smaller tube (2 types)and will actually..

SKF Asymmetric - Roll formed design benefits: • High camber stiffness compared to a symmetric ball design • Reduced brake judder and piston knock-back • Roll formed and self retained without need for a stub shaft • Increased stiffness for better..

Skip-Shift Eliminator, 2010-11 Camaro/2009 GXP/1994-02 Camaro/Firebird/1997-10 Corvette/2004-06 GTO/2009-10 Dodge Challenger 6-Speed

These clutch kits are designed for use with SPEC flywheels or any aftermarket LS1/6 single mass flywheel, which bolt to the LS7 and offer a considerable reduction is rotating mass. These kits increase friction surface diameter to 12inches while reducing..

These clutch kits are designed for use with SPEC flywheels or any aftermarket LS1/6 single mass flywheel, which bolt to the LS7 and offer a considerable reduction is rotating mass. These kits increase friction surface diameter to 12inches while reducing..

The SPEC Super Twin is for street and track use in cars with extreme horsepower and torque (700-1500 ft lbs tq). The Super Twin offers near-stock drivability, tremendous life expectancy, a no shimming/setup bolt-in installation and maintenance free...