NHRA required for cars running 12.99 or quicker in the quarter mile. We manufacture our loops out of NHRA legal 1/4" x 2" plate and both designs are true bolt-ons using existing mounting holes, no welding or drilling required. Available standard in your..

COAST 4" DRIVE SHAFTS, 2007-2009, GT500, ALUMINUM, 4", 700+ HP

1.1350 front u-joint with flange to mount up to the transmission 2. 3.5” 6061-T6 aluminum rated for 3450ft lbs of torque, custom welded on our auto feed machines 3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft...

Detroit Truetrac: * Uses pairs of "Helical" gear sets * Gears only - no clutch packs. * Ideal for 4WD front axles or rear axles, as well as 2WD; light trucks, SUV?s, cars. * Rugged yet smooth and quiet. * Torque bias ratios of 2.5 to 3.5:1 range.

Ford Racing 8.8" Low Profile Axle Girdle Rear Cover

Limited Slip Differential. Is your stock rear end leaving you in the lurch? Then you need to upgrade to a Ford Racing 8.8" 31 Spline Traction-LOK Limited Slip Differential with Carbon Discs from AmericanMuscle. A Limited Slip Differential (LSD) sometimes.

Ford Racing 96-08 Mustang 8.8 3.55 Gears

Ford Racing Shelby GT500 Black Shift Knob and Stick

Moser 07-09 GT500 31 Spline C-Clip Axles

Fits 2011-2012 GT500 - 31 spline, 5 lug with ABS adapter 8.8" Ford rear 31 spline, 31 11/16" & 32 13/16" long

Motive Gears are for 8.8" Ford rear end. These Motive Gears will fit all GT and Cobra models from 1979 to 2011-2012 . Motive uses these gears in high horsepower racecars with outstanding results. Master bearing kit recommended by most installers for Motiv

Motive Gears are for 8.8" Ford rear end. These Motive Gears will fit all GT and Cobra models from 1979 to 2011-2012 . Motive uses these gears in high horsepower racecars with outstanding results. Master bearing kit recommended by most installers for Motiv

•Front & Rear Pinion Bearing •Pinion Seal •Carrier Bearings •Carrier Shims •Differential Bearings •Ring Gear Bolts •Brush, Gear Marking compound •Crush sleeve, Pinion nut •Loctite and cover gasket or rtv

Rear Differential - Shelby GT500

Shelby American 8.8" Axle Cover

Shelby Rear Drive Shaft Tunnel Brace

* Billet Ford 8.8" Rear End Differential Cover * 30 Minute Install * CNC Machined Billet Aluminum * Replaces the flimsy factory differential cover * Increases overall housing strength * Fill and Drain port added for easier maintenance * Bearing...

* Billet Ford 8.8" Differential Cover * 30 Minute Install * CNC Machined Billet Aluminum * Replaces the flimsy factory differential cover * Increases overall housing strength * Fill and Drain port added for easier maintenance * Bearing supports...

* Billet Ford 8.8" Rear End Differential Cover * 30 Minute Install * CNC Machined Billet Aluminum * Replaces the flimsy factory differential cover * Increases overall housing strength * Fill and Drain port added for easier maintenance * Bearing...

* Billet Ford 8.8" Differential Cover * 30 Minute Install * CNC Machined Billet Aluminum * Replaces the flimsy factory differential cover * Increases overall housing strength * Fill and Drain port added for easier maintenance * Bearing supports...