2.9L Whipple Supercharger Upgrade

INSTANT BOOST / HORSEPOWER & TORQUE AT ANY RPM Direct bolt on replacement. More power, cooler charge temp, less power consumption/parasitic loss than stock Eaton roots-type. 4.0 liter vs. factory 2.1 liter for more power potential. More power...

INSTANT BOOST / HORSEPOWER & TORQUE AT ANY RPM Direct bolt on replacement. More power, cooler charge temp, less power consumption/parasitic loss than stock Eaton roots-type. 4.0 liter vs. factory 2.1 liter for more power potential. More power...

•Polished Finish •Fits 2011-2012 Mustang SVT •Does NOT fit 07-09 Mustang SVT •Produces 750 hp @ 6100 rpm and 719 lb-ft @ 4200 rpm @ 17 psi boost

•Black Wrinkle Finish For Polished Finish see M-6066-MSVT29PC •Fits 2011-2012 Mustang SVT •Does NOT fit 07-09 Mustang SVT •Produces 750 hp @ 6100 rpm and 719 lb-ft @ 4200 rpm @ 17 psi boost

Innovators West 07-09 Shelby GT500 Standard Diameter Balancer

NOTE: Included with the balancer is a longer than stock M12 bolt for installing the balancer, and the three M10 bolts that are needed if you ever remove this balancer.

A time tested and proven Kenne Bell innovation, the BOOST-A-PUMP™, powers some of the world’s most powerful production street and competition vehicles. It activates only at full throttle or boost, so it doesn’t “bloat” or “overload” the fuel system at...

Recommended for high cylinder pressure (turbocharged, supercharged, nitrous). The ignition system market has changed. The new domestic and import engines no longer use a distributor with one coil. Instead, there are multiple coils - one (1) for each...

Factory original on the Shelby GT500 SuperSnake* this polished super charger turns out 750 horsepower to make your GT500 unstoppable! This mammoth 1000hp+ super charger's inlet is designed for use with dual 75mm throttle body or allows the use of the sto

New for 2010, this polished Shelby branded GT500 Kenne Bell 3.6L twin screw super charger features a new, liquid cooled design. This innovative, high efficiency design lowers parasitic losses and its competition proven performance pumps out 800 hp...

• 150+ PSI High Volume Pump • 3 Quart Reservoir • 2 Nozzles To Cover a Wide Range of Horsepower • Required Hardware Needed For Installation • Comprehensive Instructions

The Stage 3 Boost Cooler® is unmatched for accuracy and adjustability in water-methanol injection systems. This system can be used on ANY EFI engine - naturally aspirated or forced induction.

Torco Accelerator Unleaded Race Fuel Concentrate (Case of 6) Torco Accelerator will transform the make up of premium pump gas to closely resemble race fuel. Creates greater efficiency…. more horsepower • Can raise the Octane of your fuel as high as 105.

◦INSTANT BOOST / HORSEPOWER & TORQUE AT ANY RPM ◦Fits under stock hood, no notching required. ◦Direct bolt on replacement. ◦More power, cooler charge temp, less power consumption/parasitic loss than stock Eaton roots-type. ◦2.9 liter vs. factory 2.1

•Crusher inlet •EGR extension block •New bypass valve •EGR tube •Offered in Black or Polished

Looking to increase or lower boost on your 2.9 or 3.4L Whipple? Then you'll need one of Whipple's 10 rib supercharger pulleys. The Whipple pulley doesn't need any special tools for installation. It simply bolts to the supercharger using 4 allen bolts.